Soy Wax Candle Care & Safety

At Peonies & Palms, we want you to enjoy your soy wax candles safely and get the best experience from every burn. Follow these simple tips for optimal use and safety:

Best Use Tips

• Trim the wick before each burn to about ¼ inch (6 mm). This helps prevent excessive flickering, soot, and uneven burning.
• Burn your candle for 2–4 hours at a time to allow the wax to melt evenly across the surface. This prevents tunneling and maximises scent throw.
• Keep the candle away from drafts, fans, or air vents to ensure a steady flame and even burn.
• Place your candle on a heat-resistant surface to protect furniture from heat damage.
• Allow the candle to cool completely before moving it.

Safety Guidelines

• Never leave a burning candle unattended.
• Keep candles out of reach of children and pets.
• Do not burn candles near flammable materials such as curtains, papers, or clothing.
• Always extinguish the candle before it burns down to less than ½ inch of wax remaining.
• Use a snuffer or gently blow out the flame — avoid using water to extinguish.
• If the wick becomes crooked or submerged in wax, carefully straighten it or trim as needed before relighting.

Additional Tips

• Avoid burning candles for more than 4 hours at a time to maintain wick integrity and scent quality.
• Store candles in a cool, dry place away from direct sunlight to preserve fragrance and colour.

By following these guidelines, you can enjoy the clean, natural glow and beautiful fragrance of your soy wax candles safely and for longer.

CANDLE SAND INSTRUCTIONS

• Choose a Vessel: Select a thick, heat-safe glass or ceramic container. Ensure it is wide enough to maintain at least 4 to 5 cm of space between the wick and the container's edges.
• Pour the Sand: Pour your wax granules into the container until it is about 70% to 80% full. Level the surface by gently tapping or stirring the granules. You can get creative and stack different colours for unique designs.
• Insert the Wick: Place the wick into the centre of the sand, pushing it in deep enough so that no more than 0.5 to 1 cm remains visible on the surface.